Your garage system is one of the largest moving parts of your home and a critical point of entry. An essential component ensuring its safe operation is the garage door sensor—tasked with preventing the door from closing if an object or person is in its path. These sensors are vigilant guardians of your garage, but when they start flashing a red light, it can be a signal for immediate attention. Understanding what this blinking beacon means is crucial for maintaining both the functionality and safety of your garage system. Let our specialists from professional garage company in Fort Lauderdale unravel the mystery behind the red blinking light and troubleshoot common garage door sensor issues.
Recognizing the Red Alert
A red blinking sensor light on a garage door sensor typically indicates an obstruction or misalignment. These sensors use an invisible infrared beam to detect any interference in the door’s path. If this beam is broken or disrupted, the sensor reacts by signaling the garage door opener to stop and reverse the door, and it manifests as a red blinking light.
Common Causes for Red Light Blinking
The most straightforward issue to fix the blinking indicator light is an obstruction. Even the smallest item on the ground or a buildup of debris can trigger the sensor.
2. Misaligned Sensors
Sensors need to be perfectly aligned to communicate effectively. If they’re knocked out of alignment, the infrared beam can’t connect, and the sensor will blink red.
3. Wiring Problems
Over time, wires can become frayed, loose, or disconnected, which can interrupt the sensor’s operation.
4. Dirty Lenses
From time to time, dust and dirt can accumulate on sensor lenses, blocking the infrared beam.
5. Malfunctioning Sensors
If none of the above issues are present, the safety sensors themselves may be malfunctioning and need to be replaced.
1. Check for Obstructions
Inspect the area around the garage door sensors system for any objects, and remove them to see if this resolves the issue.
2. Align the Sensors
Adjust the sensors until they are perfectly aligned. Some models show a green light when alignment is correct.
3. Inspect the Wiring
Examine the wiring for any loose wires or visible signs of damage and ensure they are securely attached to the sensors and the opener.
4. Clean the Lenses
Gently wipe the sensor lenses and sensor eyes with a soft cloth to remove any dust or grime.
5. Reset the Sensors
Sometimes simply resetting the sensors by unplugging the garage door opener for a minute and then plugging it back in can solve the issue.
6. Consult the Manual
Refer to the manufacturer’s manual for specific troubleshooting steps related to your garage system model.
7. Contact a Professional
If the problem persists, it’s best to call a professional technician to inspect and repair the sensors.
The Importance of Functioning Sensors
Garage door sensors are not only a functional necessity but a legal one. Since 1993, federal law has required all garage systems to have a secondary safety reversing mechanism, typically implemented with these sensors. Keeping them in working order is crucial for the protection of your family, pets, and property. Connect with Eden Garage Doors for garage door services in Fort Lauderdale. We will give the green light to your garage sensors!